Dimmable LED 24V DC Transformer Driver AU for powering our 24V LED festoon lights on your lighting system. When making up a light with 24V LED’s for signage or custom solution choose a driver with enough power to cover the total wattage required. You should allow for some headroom to allow for cable length and cable type also.
The Mean Well PWM series is an LED driver featuring the constant voltage mode with PWM style output, which is able to maintain the colour temperature and the brightness homogeneity when driving all kinds of LED strips. The PWM series operates from 90~305VAC and offers models with different rated output constant voltage ranging between 12V and 48V. Thanks to the high efficiency up to 90%, with the fan-less design, the entire series is able to operate for -40ºC ~ +85ºC case temperature under free air convection. The entire series is rated with IP67 ingress protection level and is suitable to work for dry, damp or wet locations. PWM series is equipped with dimming function that varies the duty cycle of the output, providing great flexibility for LED strips applications.
Three modes of dimming are available.The driver will automatically detect the mode used.
- 1-10VDC Potentiometer/dimmer control.-(SDF-30)
- 10V PWM signal – frequency range 100Hz ~ 3KHz.
- Resistive – 100K Potentiometer.(Only suitable for dimming a single light fitting/driver.)
Push button switching & dimming
The DAP-04-S01DM module can accommodate a single momentary push button to control dimming and mains – side switching functions. Up to 20 light fittings can be controlled with one push button.
If no dimmer is fitted the LED will display at full brightness.
DALI control is possible with the addition of a DALI to PWM Converter ‘Mean Well DAP-04-S01DM’.
SELV, 240VAC input with 24VDC Constant Voltage, waterproof IP67 rated with AUS 3 pin plug.
Complies to IEC-61347-2-13:2006; AS/NZS 61347.1.2002 with RCM certification.