Plumbing pipe Russian Insulator ceiling light

AUD $265.00

Weight: 2.0kg

Pendant Pipe length (+AUD $0.05) *

Choose here an overall length from the ceiling to the base of the insulator. Minimum length is 330mm. This adds a length of plumbing pipe to allow a precise drop length.

Custom Finish *

Choose here an alternate finish for the pipe sections

Choose Country Voltage and hardware option

Choose here to make 240V or 120 Volt FOR USA AND CANADA REQUIREMENTS. This does not provide a UL Listed product but provides UL compatible hardware.

Warranty: 1 Year

Download PDF

Product Description

Plumbing pipe Russian Insulator ceiling light. This ceiling light is made from galvanised water pipe with cast fittings. The pipe is connected to the insulator using a custom ELG plastic washer. The Chinese made glass insulators were designed for the high voltage power lines that cross the Russian Federation from power stations to sub stations.

This is a high tension cable insulator normally used on very tall power grid towers. This insulator design was originally made in Soviet Union by the LVIV INSULATOR PLANT started in 1965 and later became the LVIV INSULATOR COMPANY in Lviv, Ukraine in 2002. These insulators weigh in at around 1 kilo so they are expensive to ship and can be supplied with a chain mount in addition to a top hook for ceiling mount. Due to the fact that these insulators are still in manufacture they are able to be sourced with some confidence from suppliers in China.

The minimum drop length for this light is 330mm and at this length comes with no pipe component but fits directly to the ceiling plate. Any increase in this length adds a pipe component between the ceiling plate and the top coupler. Pictured here with 630mm total length total as example in galvanised finish.

Recommended bulbs are listed below. The light fitting can take a variety of bulbs and is pictured with a Small Edison vintage


Vintage industrial insulator design.
Steel and cast plumbing pipe construction.
Solid brass E14 lamp holder.
Choose from a variety of glass insulators.
Mounting flange compatible with 4 inch J- boxes.
Range of plumbing pipe surface finishes.

Finish options

Plumbing pipe components available in standard Galvanised iron, Rusted iron, Painted finish, and Raw steel, supplied as linseed oil rubbed.


Indoor use only.
E14 240VAC (eg. AUS, UK, NZ) or E12 120VAC (eg. US, CA).
Integral earth wire.
Secures to the wall via cast flange.
Globe 40W Max.
Globe not included.


Fluted Insulator option:
Height: 330mm (minimum)
Width: 130mm

Wide Insulator option:

Height: 330mm (minimum)
Width: 160mm


There are no reviews yet

Add a review
Plumbing pipe Russian Insulator ceiling light Plumbing pipe Russian Insulator ceiling light
* Rating is required
Your review
* Review is required
* Name is required
Add photos or video to your review

Recommended 240 Volt globes for this product…