12 Volt TRIAC dimmable constant voltage LED driver

(1 customer review)

AUD $24.50AUD $38.50

Dimensions

  • 20 Watt 135mm x 45mm x 26mm
  • 60 Watts 21mm x 61mm x 39mm.

Specifications

  • Primary Voltage: 200 – 250 Volts.
  • Frequency: 50/60 Hz.
  • Input Current: 0.06 A.
  • Maximum Output: 20W, 60W.
  • Output Voltage: 12 Volts DC.
  • Output Current: 0 – 0.5 A.
  • Power Factor: >0.90 ?.
  • Ambient Temperature: 50 °C.
  • IP Rating: IP20
Shipping Weight: 1kg

Warranty: 3 Years

Download PDF

Product Description

12 Volt TRIAC dimmable constant voltage LED driver for powering our 12 Volt LED globes on your lighting system. When using 12V LED’s for a bathroom solution choose a driver with enough power to cover the total wattage required. You should consult an electrician prior to ordering to make sure you have the correct driver for the task.

We manufacture 12 Volt LED’s for use where low voltage is required in areas of where fittings might come into contact with water. These globes require a constant voltage, supplied by a separate LED driver. These TRIAC dimmable LED drivers provide a retrofittable dimming solution, since the existing switch and dimmer can be used to control dimming of these low voltage globes. In fact, they can be used with either leading edge or trailing edge dimmers.

These drivers are designed to be used with leading edge or trailing edge dimmers wired on the 240V side.

TRIAC Dimming

Traditional TRIAC dimmers, also known as phase-cut dimmers, were designed for resistive loads such as incandescent or halogen lights. Originally configured as leading edge, they were the standard dimmers used, and so in legacy situations, there will most likely be a TRIAC dimmer installed. Unfortunately, these leading edge dimmers are not readily compatible with modern LED globes, as LEDs do not appear as a resistive load. Therefore, LED based solutions using a standard style LED driver will not perform as expected with a TRIAC wall dimmer. For example, our retrofit 240 Volt LED’s require a trailing edge dimmer as a replacement for the traditional dimmer.

 

 

Dimensions
20 Watt 135mm x 45mm x 26mm
60 Watts 210mm x 61mm x 39mm.

Specifications
Primary Voltage: 220 – 240 Volts.
Frequency: 50/60 Hz.
Input Current: 0.06A.
Maximum Output: 20W, 60W.
Output Voltage: 12 Volts.
Output Current: 0 – 0.5 A.
Power Factor: >0.60.
Ambient Temperature: 50 °C.
IP Rating: IP20

1 review for 12 Volt TRIAC dimmable constant voltage LED driver

5.0 Rating
1-1 of 1 review
  1. Verified reviewVerified review - view originalExternal link

    Superior customer service and products, reasonably priced, good shipping, what more could you possibly ask for.

    (0) (0)
Add a review
12 Volt TRIAC dimmable constant voltage LED driver 12 Volt TRIAC dimmable constant voltage LED driver
Rating*
0/5
* Rating is required
Your review
* Review is required
Name
* Name is required
Add photos or video to your review